HEAT TRACING, Heat Tracing, Heat Tracing Systems,
remote glycol heat tracing
Model HT – 24 (Base model) Information
|
Construction Materials
|
| Frame |
Aluminum |
|
Fluid reservoir |
Leak tested @ 210 kpa |
| Gas capture chamber |
Leak tested @ 210 kpa |
| Exchanger guard |
Aluminum |
|
Fittings
|
| Hi-temp shutdown valve (factory set) |
93 degrees Celsius |
| Fluid return throttle valve-with built in by-pass(factory set) |
40 degrees Celsius |
| Pressure cap on fluid reservoir |
48kpa |
| Gas capture chamber-Relief valve |
35 kpa |
| Threaded fittings (painted) |
2000 lb forged steel |
| Tubing and fittings |
Stainless steel |
| Heat exchanger |
Stainless steel ASME Rated |
|
Pump – Non Lubricated
|
| Maximum operating pressure |
690 kpa |
| Operating temperature range |
-40 to 65 degrees Celsius |
| Flow rate (@60 SPM) |
4.5 liters/minute |
|
24” x 24” – Mark II Flush Mount Catalytic Heater
|
| Heat input |
16,000 Btu/hr. |
| Face temp. of heater @ maximum output |
370 degrees Celsius |
| Gas consumption @ maximum output |
16 SCF/Hr. |
|
Dry Weight of Unit - Approx.70 Kgs.
|
| Fluid capacity (500’ of 3/8” or 1/2" tubing) |
10-12 liters |
| Fluid reservoir - Working volume |
1.4 liters |
| Fluid reservoir expansion volume |
1.2 liters |
|
Circulation Fluid
|
| Kold Snap-40 TM Heat Transfer Fluid |
No mixing required |
|
Maintenance Schedule
|
| Circulation Fluid |
Replace every 2 years |
| Pump Servicing |
Suggested every 2 years |
Service and maintenance available from KoldKatcher. Contact us at: (403) 644-2268.
To download a .PDF copy of the MSDS, Click Here
NOTE: If you do not have a PDF viewer, click on the Adobe Reader
icon to download your free copy in just a few minutes.
 |
| MODEL |
HT 12 |
HT 24 |
HT 48 |
| BTU/Hour |
8000 |
16000 |
32000 |
| Max. Ft. Heat Trace |
250' |
500' |
1000' |
| Compact Design |
|
|
  |
| Aluminum Frame |
|
|
|
| Powder Coated Cabinet |
|
|
  |
| Insulated All Weather Enclosure |
|
|
|
| Building/Skid Mount |
  |
  |
  |
| Remote Monitoring & Control |
|
|
|
*Custom Models Available
Standard Items Include:
- One year full parts warranty
- Factory set high temp. shutdown
- Thermal control valve
- Spill containment
- Exchanger guard
- 25' Electrical starter cable
- Catadyne exhaust vent shroud
Optional Items:
- NEW- REMOTE MONITORING AND CONTROL FUNCTIONS
Heat Tracing |
Technical Data |
Heat Transfer Fluids |
Contact Us |
Home
|