KOLD KATCHER INC. - HEAT TRACING SYSTEMS Box 306 Standard, Alberta, Canada T0J 3G0 PH: (403) 644-2268     FAX: (403) 644-2267 TECHNICAL DATA DESIGN SPECIFICATIONS Model HT – 24 Specifications (Base Model) Construction Materials Frame Aluminum Fluid reservoir Leak tested @ 210 kpa Gas capture chamber Leak tested @ 210 kpa Exchanger guard Aluminum Fittings Adjustable Hi-temp shutdown valve 93 degrees Celsius ( Max. Set point ) Adjustable Temperature control 65 degrees Celsius ( Max. Set point ) Pressure cap on fluid reservoir 48kpa Gas capture chamber-Relief valve 35 kpa Threaded fittings (painted) 2000 lb forged steel Tubing and fittings Stainless steel Heat exchanger Stainless steel ASME Rated Pump – Non Lubricated Maximum operating pressure 690 kpa Operating temperature range -40 to 65 degrees Celsius Flow rate (@60 SPM) 4.5 liters/minute 24” x 24” – Mark II Flush Mount Catalytic Heater Heat input 20,000 Btu/hr. Face temp. of heater @ maximum output 370 degrees Celsius Gas consumption @ maximum output 16 SCF/Hr. Dry Weight of Unit - Approx. 45 Kgs. Fluid capacity (500’ of 3/8”) 10-12 liters Fluid reservoir - Working volume 1.4 liters Fluid reservoir expansion volume 1.2 liters Maintenance Schedule Circulation Fluid Replace every 2 years Pump Servicing Suggested every 2 years Spill containment Standard Service and maintenance available from KoldKatcher. Contact us at: (403) 644-2268. AVAILABLE OPTIONS MODEL TS 12 HT 12 HT 24 HT 48 BTU/Hour 4000 10000 20000 40000 Max. Ft. Heat Trace 50' 250' 500' 750' Compact Design • • •   Aluminum Frame • • •   Insulated All Weather Enclosure   • • • Conversion Kit   •     *Custom Models Available Standard Items Include: One year full parts warranty Adjustable High Temperature Limit Adjustable Temperature Controls Pump isolation valves Pressure gauge Spill containment 25' Electrical starter cable Optional Items: Aluminum Stand Remote monitoring Dessicant Dryer Service Kit